At Turbotech we value quality and only stock quality products. We want you to have confidence in our product too which is why we offer a 1 year warranty on all of our Turbo Chargers and Exchange Units. The one year warranty covers all Turbo Chargers and Exchange Units, whether purchased in store or online. View our warranty fact sheet here and our terms and conditions here.
The following recommendations may be taken into account along with the engine operation guide.
- Inspect/clean/replace air cleaner element, oil filter, gaskets, pipes and fittings.
- Clean mounting area and install new gaskets where applicable. (fit oil feed and drain gasket dry) do not use tread tape or silicone on any gaskets.
- Tighten all nuts, bolts and screws to manufacturers torque recommendations. Check torque tension on turbocharger v band clamps which sometimes are left loose to facilitate turbocharger orientation when fitting to engine.
- Prime the turbocharger with oil before starting engine. It is usual to hold the stop lever of the engine shut whilst turning the engine on the starter motor until a flow of oil is noticed from the oil return drain of the turbocharger.
- Start the engine and check for leaks, unusual noises etc. If vehicle fitted with actuator, boost check vehicle and set to manufacturer’s specifications. Fuel pump settings to be adjusted by a fuel pump injection company and then lead sealed. Fuel pump may have to be removed to carry out fuel pump settings.
- If any problem is noticed then report same to staff at TURBOTECH immediately. Do not continue to operate the unit as damage which is a consequence of any further operation of the turbocharger will not be covered under warranty.
